Skip to content
RESEARCH · QUANTUM HARDWARE · SUPERCONDUCTING CIRCUITS

A removable neon coating could help clean superconducting-chip surfaces

A November preprint provides fuller evidence for a previously reported resonator effect, including second-chip results and surface microscopy.

Published Source report Sources checked
Reading tools for text size, copying, printing and your reading list
My reading list
An exposed dilution refrigerator hangs beneath a metal support frame and laboratory tubing.
Illustrative photoDaderot

A coating that disappears after treatment could offer a gentler way to improve superconducting hardware. In a November 11 preprint, Australian researchers report evidence that freezing neon onto chip surfaces and then removing it can reduce microwave energy losses, possibly by moving fabrication residues.[1]

The experiment tested superconducting resonators, components that store microwave energy, rather than working . Their internal quality factor measures how little energy they lose. Better resonators can matter for quantum hardware, but these measurements do not establish longer qubit lifetimes or faster quantum computers.[1]

The headline effect is not entirely new. Andrew Palmer presented persistent improvements after neon removal at the American Physical Society’s March meeting. The paper reports second-chip results and microscopy not described in the March abstract.[2][1]

Across two chips, each containing eight resonators, the researchers compared performance through cooling, neon deposition and removal. The response was uneven. At high microwave power, six resonators improved on the second chip, while two worsened. The main device received more extensive temperature-and-power measurements.[1]

For one resonator on the main chip, the reported quality factor at single-photon occupancy, an average of one microwave photon, rose from about 470,000 to 1.4 million. Larger figures elsewhere in the paper concern different operating conditions or fitted loss contributions and should not be read as equivalent improvements in qubit performance.[1]

The proposed explanation is surface cleaning. Atomic-force microscopy of a separate hexagonal boron nitride sample showed polymer residues gathering into clusters after neon treatment, leaving clearer patches. That supports redistribution of contaminants, but does not directly prove which defects caused the resonators’ losses. The microscopic defects remain unidentified, and further controlled comparisons are needed.[1]

The engineering appeal is a possible alternative for materials that tolerate harsh chemical or plasma cleaning poorly. The new evidence makes that route worth investigating; its uneven effects also show why a promising surface treatment is not yet a dependable chip-making recipe.[1]

Keep your reading trail

Evidence & context

3 linked sources

Experimental preprint; no associated journal publication identified; fuller supporting evidence for an effect disclosed in March, not a demonstrated qubit-lifetime improvement.

How to read the evidence and dates

An announcement records what an organization stated. An experiment reports an observation. A simulation or resource estimate depends on its assumptions. QubitWire’s analysis connects these sources; the labels are not quality scores.

Published is the article’s first QubitWire publication. Updated marks a substantive content change. Sources checked records a review of the underlying evidence. An older paper can support a new explanation, and another press release about the same work is not independent replication.

QubitWire take

Separate low-power resonator performance, high-power second-chip comparisons and supporting microscopy before judging a proposed cleaning mechanism.

Sources

  1. Palmer and colleagues: Reducing TLS Losses in Superconducting Circuits Using Solid Neon

    November 11, 2026 preprint; no associated journal publication identified. Sections II–V and Appendices H/I distinguish main-chip low-power measurements, second-chip high-power results and microscopy on a separate hBN sample.

  2. Earlier APS March meeting abstract: Reducing TLS losses in superconducting circuits using solid neon

    March 18, 2026 abstract already reported persistent improvements after neon removal. The November paper gives second-chip and microscopy evidence not described in the abstract; this does not establish everything shown in the delivered talk.

  3. arXiv submission and version history

    Version 1 submitted November 11, 2026 at 04:29:02 UTC. No later version or journal publication identified at the November 15 check.

READ NEXT

Continue exploring

All Research stories
  1. Quantum hardware

    The Noise in an Ion Trap May Be Hiding in the Materials

    A new model predicts electric-field noise from dielectric and metallic losses and comes within a factor of four for one tested trap.

    Published · Source report · Sources checked · About 2 min read
  2. More on superconducting hardware

    Double-Resonator Coupler Design Simulates a 20-Nanosecond CZ Gate

    A proposed superconducting circuit uses two resonator paths to suppress idle coupling, but its speed and error figures remain simulation results.

    Published · Source report · About 2 min read